TECHNICAL SPECIFICATIONS
- Horizontal and Vertical Steam Generators with 100kg/h-8000kg/h capacity and 3 bar-20bar pressure
- According to required steam capacity just in 5 (five) minutes
- Saving on ''time and energy'' by getting steam in a short time
- Compared to classic steam boilers, ''10% fuel saving''
- Safe system ''without risk of explosion'' in that steam happen in serpentine
- Opportunity of using with Liquid, Gas and Duel fuel burners
| |
STANDARD TYPE CONTROL
- If there is a problem with any step of safety chain, the system secures itself and sounds the alarm with light and sound.
- If there is no problem with the safety chain, Operator is able to control of running equipments of generator by schematic drawing on the panel. The light located on defective equipment will be red and ease fault follow-up
| |
PLC TYPE CONTROL
| - Thanks to enhanced PLC (Programmable Logic Control) screen, provides opportunity to follow steam pressure, temperature and chimney temperature.
- The Control system sounds the alarm and reports fault that where it is to operator on the system screen when a fault occurs in the system. The system do not operates again before operator resets the control system.
- Operator is able to shut the system off or switch the system on according to steam pressure and steam-chimney temperature that appears on the panel and regulates pump rpm according to steam quality. Operator is also able to shut the generator off and switch the generator on at any time.
- Design and manufacture of electrical control panels and automation system.
- Software system programmed by BROX
- Express service by remote access in PLC system.
- Up to 20 systems for safety and drive control system
- Thanks to Modular structure allow to add controls for (Counter, Conductivity, Modulated level, etc.)
- Simplified usage with touch-unblack screen in PLC System.
- Light and Audible alarm system
- Modbus and Profibus communication facilities in the PLC System
|
USER ADVANTAGES
- Clean combustion
- Low-noise operation
- Envirenmentally sensitive operation
- Official acceptance certificates and control measures
- Low-fuel consumption
- Low-fuel consumption
- Low-heat loses
- Less corrosion
- In total, seriously reduced operating costs
| |
IMPLEMENTATION FIELDS
| - Feed Industry
- Drycleaning
- Food Industry
- Laundries
- Build Ingindustry
- Paper Industry
- Clothing (made-upclothes) Industry
- Hospital
- Hotel-Holiday places
- Concrete Industry
And in numerousfields in whichsteam is needed....
|
Product Type | Operating pressure | Capacity | Fuel consumption | Smoke Lining Resistance | Water Volume | Empty Weight |
Steam | Kw | Kcal/hx 1000 | Natural Gas Hu=8250kcal/Nm3 | Fuel oil Hu=9600kcal/kg | Diesel Fuel Hu=10.200kcal/kg |
bar | kg/h | Max | Max | Max | Max | Max | mbar | Liter | Kg |
Model 100 | 3-20 | 100 | 70 | 60 | 7.3 | 6.5 | 5.9 | 2.8 | 32 | 550 |
Model 200 | 3-20 | 200 | 140 | 120 | 14.3 | 12.5 | 11.8 | 3 | 39 | 700 |
Model 400 | 3-20 | 400 | 280 | 240 | 29.1 | 25 | 23.5 | 3 | 44 | 1000 |
Model 500 | 3-20 | 500 | 350 | 300 | 36.4 | 31.3 | 29.4 | 3.5 | 65 | 1200 |
Model 600 | 3-20 | 600 | 420 | 360 | 43.6 | 37.5 | 35.3 | 3.5 | 65 | 1350 |
Model 800 | 3-20 | 800 | 560 | 480 | 58.2 | 50 | 47.1 | 4 | 84 | 1600 |
Model 1000 | 3-20 | 1000 | 700 | 600 | 72.7 | 62.5 | 58.8 | 5 | 103 | 1800 |
Model 1250 | 3-20 | 1250 | 875 | 750 | 90.9 | 78.1 | 73.5 | 6 | 121 | 2050 |
Model 1500 | 3-20 | 1500 | 1050 | 900 | 109.1 | 93.8 | 88.2 | 7 | 139 | 2400 |
Model 2000 | 3-20 | 2000 | 1400 | 1200 | 145.5 | 125 | 117.6 | 8 | 272 | 3400 |
Model 2500 | 3-20 | 2500 | 1750 | 1500 | 181.8 | 156.3 | 147.1 | 8 | 304 | 3750 |
Model 3500 | 3-20 | 3500 | 2442 | 2100 | 254.5 | 218.8 | 205.9 | 9 | 442 | 4750 |
Model 4500 | 3-20 | 4500 | 3140 | 2700 | 327.3 | 281.3 | 264.7 | 9 | 581 | 5500 |
Model 5000 | 3-20 | 5000 | 3490 | 3000 | 363.6 | 312.5 | 294.1 | 9.5 | 720 | 5800 |
Model 7000 | 3-20 | 7000 | 4885 | 4200 | 509.1 | 437.5 | 411.8 | 11 | 860 | 7750 |
Model 8000 | 3-20 | 8000 | 5582 | 4800 | 581.8 | 500 | 470.6 | 11.5 | 998 | 8500 |
- We have the right to change and cancel technical information, measurement and pictures in this catalogue without giving notice
- Our boilers is produced in accord with EN 12953 standards.
- All technical specifications on the table are suitable for horizontal fast steam generators as well as vertical ones.
- Please contact with BROX about different capacities.
MEASUREMENTS
TECHNICAL MEASUREMENTS |
PRODUCT TYPE | A | B | C | D Ø | E | F | G |
Model 100 | 1858 mm | 1658 mm | 200 mm | 200 mm | 1150 mm | 1030 mm | 350 mm |
Model 200 | 1858 mm | 1658 mm | 200 mm | 200 mm | 1150 mm | 1030 mm | 350 mm |
Model 400 | 1858 mm | 1658 mm | 200 mm | 200 mm | 1150 mm | 1030 mm | 350 mm |
Model 500 | 2150 mm | 1900 mm | 250 mm | 250 mm | 1300 mm | 1180 mm | 350 mm |
Model 600 | 2150 mm | 1900 mm | 250 mm | 250 mm | 1300 mm | 1180 mm | 350 mm |
Model 800 | 2364 mm | 2108 mm | 256 mm | 300 mm | 1430 mm | 1270 mm | 350 mm |
Model 1000 | 2513 mm | 2257 mm | 256 mm | 310 mm | 1500 mm | 1370 mm | 350 mm |
Model 1254 | 2816 mm | 2560 mm | 256 mm | 310 mm | 150 mm | 1370 mm | 350 mm |
Model 1500 | 3046 mm | 2790 mm | 256 mm | 310 mm | 1550 mm | 1440 mm | 350 mm |
Model 2000 | 3602 mm | 3346 mm | 256 mm | 350 mm | 1700 mm | 1600 mm | 370 mm |
Model 2500 | 3910 mm | 3604 mm | 256 mm | 350 mm | 1700 mm | 1600 mm | 370 mm |
Model 3500 | 4156 mm | 3900 mm | 256 mm | 400 mm | 1800 mm | 1700 mm | 370 mm |
Model 4500 | 4430 mm | 4030 mm | 400 mm | 600 mm | 2256 mm | 2166 mm | 390 mm |
Model 5000 | 4900 mm | 4500 mm | 400 mm | 650 mm | 2256 mm | 2166 mm | 390 mm |
Model 7000 | 4900 mm | 4500 mm | 400 mm | 650 mm | 2256 mm | 2166 mm | 390 mm |
Model 8000 | 5400 mm | 5000 mm | 400 mm | 650 mm | 2256 mm | 2166 mm | 390 mm |
We have the right to change and cancel technical information, measurement and pictures in this catalogue without giving notice
Company Information
Our firm was established in 1991 with well versed group in boiler and burner fields.
In the course of time, getting experiences in several fields of industry; production capacity, product variety, product quality and market share has increased.
Our firm is from the foremost manufacturers in Turkey on various kind of boiler and burner systems. Our products are in great demand in home and foreign market. Accordingly, our agency and service network is expanding year to year.
Prominent products in our boiler section are steam boilers, steam generators, hot water boilers, hot oil boilers, exhaust gas steam boilers and marine steam boilers.
As for the standard burner requirements, we have been manufacturing several kind of burners and combustion systems designed for solid, liquid and gas fuels successfully for long years .
Beside standard burners, we are manufacturing specific process burners for melting process of iron or non-iron metals and for the process of glass and ceramic production where the high temperature is necessary.
Our manufacturing standards conform to DIN norms.
We have necessary ISO and CE quality certificates for several kind products.
At all design and production stages, our products are being inspected by well-respected institutes like Turkish Lloyd*R* and Rina*R*.
Our products are made of the best materials which are compliant with Turkish and European quality standards. We are preferring to use well-respected world brands' electrical, electronic, and mechanical parts in our production.
We are using modern machinery technologies like x-ray measuring, plasma cutting, submerged arc welding etc.
Most basic and vital components of our products like hot corrugated furnaces and pipe coils are being manufactured within our respective factory.
Designing and implementation of all software and hardware based automation systems are being actualized by our respective engineers and technicians.
We are offering quite reasonable delivery times for our products.
All components on a boiler systems are being assembled in our factory in advance not to make our customers lose time and manpower in their site. Thus, our boiler systems are being able to be installed and started up at site quickly and easily.
In case of need, we are providing installation and startup services by our well-qualified staff at our customer's site.
Our aim is to be the leading company by producing reliable, rational, qualified and environment-friendly solutions with intensive customer satisfaction.
Our management team and employees are aware that quality can be realized with the attendance of all employees; that it can not be realized with personal success.